Underwater housing for Canon XF300 and XF305
order code: VXF3
The underwater housing VXF3 is a 10 meter depth housing for the Canon XF300 and Canon XF305 digital camcorders. Specifically constructed for these camcorders the VXF3 housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port.
The VXF3 underwater housing is not only perfect for snorkeling or shallow diving but also sandy, dusty, humid or foul weather conditions. This housing will give your camera the best possible protection while being fully operable.
The closing mechanism, which has proven itself for more than 45 years now, has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of knurled thumb screw knobs.
Straps at the bottom of the underwater housing allow weights to be attached for perfect buoyancy under water.
Turn your camera to an underwater camera.
Designed specifically for Canon XF300 and XF305 camcorders, the ewa-marine VXF3 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive an 82mm filter adapter. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of four screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
|Overall Width||=||15 cm||(5.9 inches)|
|Length of floor section||=||38 cm||(15 inches)|
|Front Port Tubus||=||no|
|max. Filter Diameter||=||82 mm|
|Weight||=||800g||(1 3/4 lbs)|
Actually, it's not in a box at all. We sell this unit in a handy, black, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- black carry-case
- manual for ewa-marine video housings
- sachet of Camera-Dry silica-gel
- foam padding
- C-A82 adapter for 82mm filter thread
Should you require a lost or broken part, please contact us via mail:
- 470/4 closing rail
- set of 3 knurled nuts for closing rail
- foam padding
- SF100 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- black nylon bag
AG-UX90 (needs additional step up adapters from 67mm to 82mm filter thread)
You must be logged in to post a comment.