ewa-marine VLA underwater housing
ewa-marine VLC underwater camera housing for video camcorders
made in Germany by ewa-marine
ewa-marine rated to a dive depth of up to 10m / 30ft
made with optical grade glass port

ewa-marine VLC

Underwater housing for video camcorders

order code: VLC

The VLC is the 10 meter / 30 ft depth housing for camcorders with or without an eye-piece viewfinder.

Designed specifically for camcorders with very wide and long monitors, the model VLC housing is manufactured from a special laminated PVC and has an integrated, optically neutral flat glass port.
Perfect for snorkeling or shallow diving, sandy, dusty, humid or foul weather conditions this housing will give your camera the best possible protection whilst being fully operable. Even the touch screen will work with the camera in the housing.

The touch screen monitor can be operated from outside while the camera is fitted inside the underwater housing.

It has a wrist strap with a handy quick release clip to ensure it is always ready to use in and under water. But also to ensure that it is always safely connected to the operator and camera man. A pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of knurled thumb screw knobs.

Designed specifically for small, "consumer" style, modern digital camcorders, with or without view finder, the ewa-marine VLC underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive a set of adapters that fit the filter threads of the most popular lenses on the market today. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.

To fixate the right hand near the power button and zoom switch, the housing has an adjustable wrist strap to position your fingers near the power and zoom switches. The strap comes with a hands quick release clip to easy handling once out ot the water

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.

Overall Width  =  23,0 cm (9 inches)
Length of floor section  =  15 cm (6 inches)
Housing Height  =  14 cm (5 1/2 inches)
Front Port Tubus  =  no  
max. Filter Diameter  =  72 mm  
Weight  =  250g (0,55 lbs)

Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.

In Addition to your housing and closing rail you will get the following with your new ewa-marine:

  • manual for ewa-marine video housings
  • initial supply of CD5
  • CA-52 adapter for 52 mm filter thread
  • CA-58 adapter for 58mm filter thread
  • step-up ring RA43-52
  • step-up ring RA37-52
  • step-up ring RA49-58

Should you require a lost or broken part, please contact us via mail:

  • 230/3 closing rail
  • set of 3 knurled nuts for closing rail
  • SF90 front port replacement (has to be replaced in factory)
  • puncture repair (has to be repaired in factory)
  • yellow nylon bag, Size S

The VLC is a generic housing and fits all camcorders that do not exceed the following dimensions:

dimensions camcorder for ewa-marine underwater housing L
W+H
T
length (monitor to back)
width + height
width monitor and camera
16 cm (6 1/4 inch)
14,0 cm (5 1/2 inch)
17,0 cm ( 6 1/2 inch)

 

 

These products might interest you as well:

VC-1M
U-B100
VLA
CD5
iWP
DUS

All data and pictures of underwater housings and rain capes on this site show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Some pictures shown on this website show the ewa-marine product including camera or other electronic equipment. These cameras or other electronics are not included with the product.