ewa-marine V100 underwater housings for Canon EOS C100
ewa-marine V102 underwater camera housing for Canon EOS C100 Mark2 and Mark1
ewa-marine rated to a dive depth of up to 10m / 30ft

ewa-marine V102

Underwater housing for the Canon EOS C100

order code: V102

The V102 is the 10 meter (30 ft) depth housing for the for the Canon EOS C100 camcorders, accepting both the Mark I and Mark II versions. The compact and handy underwater housing has a depth rating of up to 10 meters.

Designed specifically for the cinematic EOS C100 camera the V102 UW-housing is manufactured from special, laminated PVC and has an integrated, optically neutral flat glass port. Special, clear inlays at the rear allow a perfect view of both monitor and view finder.

The straps at the bottom allow weights to be attached for perfect buoyancy on and under water.

Important information:

The underwater housing is designed for Canon EOS C100 in combination with Canon EOS lenses of up to 82mm filter thread. For lenses with filter thread larger than 82mm, please see Custom Housing information below*

To fit lenses with a maximum length 145mm (5.7inches).

To fit lenses with a filter thread size of 82mm as sold. Alternatively smaller lenses can be used with industry standard reduction adapters available separately.

We can also supply you with a custom version of this housing with regards to the front port, depending on the lens you wish to use.

*To use a Canon C100 with Canon Cinematic, Zeiss Prime or other, large non EOS lenses, we need to build a custom housing with a larger front port (128mm Ø). We will need to know the lenses being used, to check whether more lens room is required in the housing.

Designed specifically for the original version / Mark1 of the Canon EOS C100, the ewa-marine V102 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive an 82mm filter adapter (a RA77-82 step-up adapter is available as an optional extra). By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.

It is supplied in a handy yellow storage and carrying case.

Overall Width  =  29 cm (11.4 inches)
Length of floor section  =  27 cm (10.6 inches)
Housing Height  =  21 cm (8 1/4 inches)
Front Port Tubus  =  yes  
max. Filter Diameter  =  82 mm  
Weight  =  650g (1.4 lbs)

Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.

In Addition to your housing and closing rail you will get the following with your new ewa-marine:

  • manual for ewa-marine video housings
  • sachet of Camera-Dry silica-gel
  • foam padding
  • CA-82 adapter for 82mm filter thread*
  • RA77-82 step-up adapter *

*until September 2017 this housing included the CA77 adapter

Should you require a lost or broken part, please contact us via mail:

  • 286/3 closing rail
  • set of 3 knurled nuts for closing rail
  • SF100 front port replacement (has to be replaced in factory)
  • puncture repair (has to be repaired in factory)
  • yellow nylon bag

 

Canon
EOS C100 Mark1 / MarkI

EOS C100 Mark2 / MarkII

 

These products might interest you as well:


All data and pictures of underwater housings and rain capes on this site show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Some pictures shown on this website show the ewa-marine product including camera or other electronic equipment. These cameras or other electronics are not included with the product.