ewa-marine V100
Underwater housing for the Canon EOS C100 Mark 1
order code: V100
Discontinued model / Please note: This housing is no longer in production and we do not have any stock left in the factory. Please check with your local distributor, dealer to find out if they can still supply you.
Please note: Our ewa-marine V102 can be used with the newer Canon EOS C100 Mark2 as well as the Canon EOS C100 Mark1 !
The V100 is the 10 meter (30 ft) depth housing for the for the Canon EOS C100 original version / Mark 1 digital camcorders. The compact and handy underwater housing has a depth rating of up to 10 meters.
Designed specifically for the cinematic EOS C100 camera the V100 UW-housing is manufactured from special, laminated PVC and has an integrated, optically neutral flat glass port.
On the rear you will find a special "pouch" for the monitor. This allows you to adjust the monitor to the best angle for the shoot you would like to control.
The straps at the bottom allow weights to be attached for perfect buoyancy on and under water.
Important information:
Designed for Canon EOS C100 used with Canon EOS lenses of up to 82mm filter thread. For lenses with filter thread larger than 82mm, please see Custom Housing information below*
To fit lenses with a maximum length 145mm (5.7inches).
To fit lenses with a filter thread size of 77mm as sold. Alternatively smaller lenses can be used with industry standard reduction adapters or a lens with 82mm filter thread could be used with the optional ewa-marine CA82 adapter available separately.
We can also supply you with a custom version of this housing with regards to the front port, depending on the lens you wish to use.
*To use a Canon C100 with Canon Cinematic, Zeiss Prime or other, large non EOS lenses, we need to build a custom housing with a larger front port (128mm Ø). We will need to know the lenses being used, to check whether more lens room is required in the housing.
Designed specifically for the original version / Mark1 of the Canon EOS C100, the ewa-marine V100 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive an 77mm filter adapter (a 82mm adapter is available as an optional extra). By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
It is supplied in a handy yellow storage and carrying case.
| Overall Width | = | 29 cm | (11.4 inches) |
| Length of floor section | = | 27 cm | (10.6 inches) |
| Housing Height | = | 21 cm | (8 1/4 inches) |
| Front Port Tubus | = | yes | |
| max. Filter Diameter | = | 82 mm | |
| Weight | = | 650g | (1.4 lbs) |
Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- yellow carry-case
- manual for ewa-marine video housings
- sachet of Camera-Dry silica-gel
- foam padding
- CA77 adapter for 77mm filter thread
Should you require a lost or broken part, please contact us via mail:
- 286/3 closing rail
- set of 3 knurled nuts for closing rail
- SF100 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- yellow nylon bag