Underwater housing for compact video camcorders
order code: VDT
The VDT is a generic 10 meter / 30 ft depth housing for camcorders without an eye-piece viewfinder.
Designed specifically for the camcorders listed below, the model VDT housing is manufactured from a special laminated PVC and has an integrated, optically neutral flat glass port.
Perfect for snorkeling or shallow diving, sandy, dusty, humid or foul weather conditions this housing will give your camera the best possible protection whilst being fully operable. Even the touch screen will work with thw camera in the housing.
The touch screen monitor can be operated from outside while the camera is fitted inside the underwater housing.
It has a wrist strap with a handy quick release clip to ensure it is always ready to use in and under water. But also to ensure that it is always safely connected to the operator and camera man. A pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of knurled thumb screw knobs.
Designed specifically for small, "consumer" style, modern digital camcorders, with or without view finder, the ewa-marine VDT underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive a set of adapters that fit the filter threads of the most popular lenses on the market today. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.
The VDT is a derivative of the older VDS, the only difference being to position for the power and zoom controls.
To fixate the right hand near the power button and zoom switch, the housing has an adjustable wrist strap to position your fingers near the power and zoom switches. The strap comes with a hands quick release clip to easy handling once out ot the water
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
|Overall Width||=||6,5 cm||(2 1/2 inches)|
|Length of floor section||=||15 cm||(6 inches)|
|Housing Height||=||14 cm||(5 1/2 inches)|
|Front Port Tubus||=||yes|
|max. Filter Diameter||=||72 mm|
Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- manual for ewa-marine video housings
- initial supply of CD5
- CA-52 adapter for 52mm filter thread
- step-up ring RA37-52
Should you require a lost or broken part, please contact us via mail:
- 230/3 closing rail
- set of 3 knurled nuts for closing rail
- SF90 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- yellow nylon bag, Size S
The following cameras have been checked to fit this ewa-marine housing:
Canon Elura 100
Canon Elura 60
Canon Elura 65
Canon Elura 70
Canon Elura 80
Canon Elura 85
Canon Elura 90
Canon Optura 30
Canon Optura 40
Canon Optura 50
Canon Optura 60
Panasonic PV-GS 250