Generic underwater housing for large, pocket cameras
order code: 3D-L
The new 3D-L is manufactured from double laminated PVC and has an optical glass port. It is rated for dives of up to 10 meters / 30ft depth.
Perfect for snorkeling, shallow diving, sandy, dusty, humidity or foul weather conditions. This housing will give your camera the best possible protection whilst being fully operable.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of two screw knobs.
The current, updated version of the 3D-L features the all new ewa-marine hard front port assembly.
Application and alternative products
The 3D-L is a practical, "all-round" housing for medium sized, compact digital cameras that is primarily intended the be used while swimming, snorkeling and other, general water sports.
Check your camera to see if it is smaller or equal to the following to ensure a safe fit into the 3D-S
H = 8 cm (3 ¼ “)
D = 5 cm (2“)
L = 18 cm (7 “)
Z = 3,2 cm (1 ¼ “)
If your camera is larger than the above dimensions, the following products offer a better solution:
Product Information and Technical Details
This underwater housing is designed specifically for small, compact digital pocket cameras, like those from the Canon Powershot, Nikon Coolpix, Sony DSC-W Series and similar, small cameras from other manufacturers.
In order to allow the sensitive zoom lenses of modern compact, digital cameras to operate without any interference, we have developed our new, hard front port assembly. This new front port is welded directly onto the ewa-marine housing thus ensuring a safe and extremely strong bond between the housing and the port. Naturally, the new, hard port assembly also includes an optical grade front port to allow distortion free, high quality photography with the camera inside the housing.
As is the case with all ewa-marine housings, the 3D-L has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
|Width||165 mm||6 1/2"|
|Height||87 mm||3 3/8"|
|Depth||33 mm||1 1/3"|
|depth incl. lens tubus||75 mm||3"|
|Diameter front glass||40 mm||1 1/2"|
What's in the box
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- manual for ewa-marine compact camera housings
- special foam padding
- sachet of Camera-Dry silica-gel
Should you require a lost or broken part, please contact us via mail:
- 3D-L closing rail
- set of 3 knurled nuts for closing rail
- puncture repair (has to be repaired in factory)
Fits the following cameras
PowerShot A1000 IS
PowerShot A2000 IS
PowerShot A570 IS
PowerShot A720 IS
Powershot SX 130 IS
Powershot SX 220 HS
Powershot SX 230 HS
Powershot SX110 IS
Powershot SX110 IS
Powershot SX120 IS
Powershot SX130 IS
Powershot SX150 IS
Powershot SX210 IS
Powershot SX220 HS
PowerShot SX230 HS
Powershot SX270 HS
Powershot SX280 HS
Powerflex 240 HD
These products might interest you as well:
You must be logged in to post a comment.