Underwater housing for the Aaton A-Minima
(available as a standard and zoom version)
order code: A-MINI
The ewa-marine A-MINI housing was specifically designed for A-Minima by Aaton, the ultimate in Super16 miniaturization. The housing is rated up to 10 meter depth or 33 feet.
Designed specifically for the Aaton Minima camera the A-MINI housing is manufactured from double laminated PVC film and has an integrated, optically neutral flat glass port. The camera can carried by the straps. A tubus with a special, clear view finder section, is integrated in the housing for the side-mounted view finder.
The housing comes as a standard version, for shorter lenses, as well as a version for longer zoom lenses.
The A-Mini is closed by a pair of non-corrosive seawater resistant clamps with four knurled screws, which ensure a perfect seal. It is important that the area of the sealing rail is always clean, in particular the clear film of the housing.
The straps at the bottom allow weights to be attached for perfect buoyancy under water. Either choose normal diving weights or the weights we offer as accessories.
The A-Mini housing is perfect for snorkeling or camera work in a pool, the surf, shallow diving, sandy, dusty, humid or foul weather conditions. This housing will give your camera the best possible protection whilst being fully operable.
Designed specifically for the Aaton Minima cameras, the ewa-marine A-MINI underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive a set of adapters that fit the filter threads of the most popular lenses on the market today. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of five screw knobs.
The A-MINI housing is limited to the following lens specifications:
A-Mini accommodated lens barrels of 7 - 9cm
A-Mini-Zoom accommodates lens barrels 13 - 15cm
|Overall Width||=||7,5 cm||( 3 inches)|
|Length of floor section||=||31 cm||( 12 1/4 inches)|
|Height||=||25 cm||( 9.8 inches)|
|Front Port Tubus||=||75 mm|
|max. Filter Diameter||=||72 mm *|
|Weight (without camera)||=||700 g|
( 1 1/2 lbs)
* if required, this unit can also be shipped with a larger front port for up to 82mm filter thread. Please enquire by e-mail.
Actually, it's not in a box at all. We sell this unit in a handy, black, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- black carry-case
- manual for ewa-marine housings
- sachet of Camera-Dry silica-gel
- foam padding
- CA adapters for 67 and 72mm filter thread
Should you require a lost or broken part, please contact us via mail:
- 600/5 closing rail
- set of 3 knurled nuts for closing rail
- foam padding
- front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- black nylon bag