Underwater housing for SLR cameras without autofocus
order code: U-FX
This is one of our earliest SLR uw-housing in our range, the original version of the U-FX dateing back to the mid seventies. Alas, the current version only shares the basic, external shape with that original version. The material, port, closing rail, glove and basically every other details were subject to the continual improvement process that is part of our manufacturing philosophy and has evolved and improved in numerous iteration over the years.
If you want to use a analog , manual SLR or a larger mirrorless digital camera with a top mounted strobe / flash on small boats, in the surf, for underwater portraits, swimming, snorkeling or diving, then this is the product for you. It is easy to operate the camera as its various components and buttons can be operated through the PVC. The original U-FX SLR underwater housing was designed at a time when analog film still had to be transported by hand between each shot and autofocus was a concept that was in the realm of science fiction. As a result it has a "glove" to allow access to the film transport (normally done with the right hand thumb), shutter release and lens control.
Although this housing was originally designed for analog cameras, a growing number of users with mirrorless system cameras, such as Olympus, Sony and Fuji, have come to appreciate its advantages when it comes to manual lens operation, especially in underwater portrait photography.
The U-FX is designed for underwater use up to a depth of 10 m / 30 ft. The limiting factor is caused solely due to operating difficulties of the hand in the glove below this depth.
Please note: modern digital SLR cameras will not fit into this housing. The are too big.
The U-FX is a practical, "all-round" housing that is primarily intended the be used while swimming, snorkeling and other, general water sports. It is limited to 10m / 30ft. A depth where you also can still take pictures with ambient, natural light. Since underwater photography generally requires the use of wide angle or macro lenses and thus shorter lenses, the lens tubes on the housing is kept rather short.
Depending on your application but the following products offer a better solution:
- U-F: similar to the U-FX, but for use with camera only, no flash
- U-FXP: similar to the U-FX, but for use with an external, side mounted flash
- U-FGM: similar to the U-FXP, but for use with an external, long, high mounted flash
Please note: modern digital SLR cameras will not fit into this housing!
Designed specifically for dSLR cameras without autofocus or automatic film transport, the ewa-marine U-FX underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive a set of adapters that fit the filter threads of the most popular lenses on the market today. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- manuell for ewa-marine housing
- CA-adapter-set for 52mm, 55mm, 58mm and 62mm filter thread
- grip ring to assist in lens focus
- sachet of Camera-Dry silica-gel
Should you require a lost or broken part, please contact us via mail:
- 286/3 closing rail
- set of 3 knurled nuts for closing rail
- SF90 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- yellow nylon bag
Some of the older versions of this housings use a velcro system to fixate the camera between the view-finder and front ports. This system can not be repaired, but we can update the housing to our SF90 and CA adapter version.
Similarly housings with the older SF80 front port can only be updated to the SF90 system.
The following list represents some of the cameras that will fit into this housing. But due to the production life of the housing it is not fully comprehensive and will also cover a range of other cameras.
A-series: A-1, AE-1, AT-1, AV-1, AE-1 Program, AL-1
F-series: F-1, FX, FP, Pellix, FT QL, Pellix QL, TL, FTb , FTbn, EF, TLb, TX, F-1n
T-series: T50, T60, T70, T80, T90
Fuji XT range of mirrorless system cameras
Leica M Series
Leica R Series
super A / super PROGRAM, program A / program PLUS, A3/A3000
P5/P50, P3/P30, P3n/P30n, P30t
PZ-10, PZ-1, PZ-20, PZ-50, PZ-1P, PZ-5P, PZ-70
SFX/SF1, SFXn/SF1n, SF7/SF10
Nikon F series (known in Germany for legal reasons as the Nikkor F)
Nikkormat F series (known in Japan as the Nikomat F series)
Nikkormat EL series (known in Japan as the Nikomat EL series)
Nikon F-601M (known in North America as the N6000)
Nikon FG Series
Pen series (all cameras, analog and digital)
OM system: M-1, OM-1, OM-1 MD, OM-1N, OM-2 , OM-2N, OM-2S/SP, OM-3, OM-3Ti, OM-4, OM-4T/Ti, OM-10, OM-20, OM-30, OM-40 , OM-77AF, OM-707, OM-88, OM-101, OM-2000, OM-G, OM-F, OM-PC
K2, KX, KM, K1000
Pentacon / Praktica
B100, B200, BC1, BCA, BCC, BCS, BMS, BX 20
L, LLC, LTL, LTL2, LTL3
Super TL, Super TL 500, Super TL 1000
Alfa range digital, mirrorless system cameras
FR, FR-I, FR-II, FX-1, FX-2, FX-3, FX-3 Super, FX-3 Super 2000, FX-7, FX-7 Super, FX-8, FX-70, FX-80, FX-103, FX-800 Super, FX-A, FX-D, FX-D SE,
Penta J, J-3, J-5, J-7, J-P
Pentamatic, Pentamatic II
TL-E, TL Electro, TL-Electro-X, TL Super
107MP/TR-7000/Revue AC-7/DAEWOO 107MP, 108MP, 109MP
200AF, 210AF, 230AF, 270AF/230 Super