Underwater housing for consumer SLR cameras
order code: U-AXP100
The U-AXP100 housing can be used on small boats, in the surf, while swimming, snorkeling or diving. It`s easy to operate the camera as its various components and buttons can be operated through the PVC.
The U-AXP100 is a special version of the ewa-marine U-AXP underwater camera housing designed to accommodate SLR cameras with larger diameter lenses than the standard version and can be used with lenses that have a 77mm or 82mm filter thread. It is designed to fit almost all common SLR cameras on the market today, irrespective of the manufacturer or model. With this housing, a whole new world of applications opens up for your standard SLR camera: Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 50m / 150ft.
If the optional BF1 lead weight is inserted into the housing, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. (this is the reason why ewa-marine housings are so safe to use: implosions are impossible) Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilized.
This is only one of a range of underwater SLR housings by ewa-marine.
The housing has a wider front glass than the U-AXP and allows in combination with the C-A 77 adapter (supplied with the housing) and C-A 82 adapter (available as an accessory from your dealer) the use of lenses with a filter thread of 77 and 82mm. This enables you to use wideangel lenses with a focal length of 17mm without problems.
Depending on your application but the following products offer a better solution:
- U-A: Compact without a top mounted flash gun ideal for snorkeling
- U AX: SLR with top mounted strobe for up to to 20m / 60ft dive depth. Offers better better illumination of the subject under poor light condition
- U-AXP:SLR with top mounted strobe and up to to 50m / 150ft dive depth. Primarily for scuba diving.
- U-AZ: For outdoor photography while canoeing or kayaking with long zoom lenses
Designed specifically for consumer style digital dSLR, large mirrorless system-camera as well as the "old style" analog 35mm SLR cameras, the ewa-marine U-AXP100 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive an 77mm filter adapter (a 82mm adapter is available as an optional extra). By means of this adapter the camera is then docked into the housings front port (which is bigger on this housing then on the standard U-AXP), ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.
The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing. To fix the right hand near the shutter release, the housing has an adjustable wrist strap and a "Finger" to position the index finger right on the trigger.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- C-A 77 special adapter
- sachet of Camera-Dry silica-gel
- foam padding (can be removed to accommodate battery grip or weights)
Should you require a lost or broken part, please contact us via mail:
- 306/3 closing rail
- set of 3 knurled nuts for closing rail
- foam padding U-A..-Series
- SF100 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- yellow nylon bag
EOS 10D 20D 20Da 30D 40D 50D
EOS 100D 300D 350D 400D 450D 500D 550D 600D 650D 700D 750D 760D
EOS 1000D 1100D 1200D 1300D
Digital Rebel XT XTi XSi T1i T2i T3i T4i T5i T6i T6s SL1 XS T3T5
Kiss N X X2 X3 X4 X5 X6i X7i X8i F X50 X70
analog EOS: 1N 3 5 10 30 50 100 300 500 600 620 630 650 700 750 850 888 3000 5000 IX RT Elan
D3000 D3100 D3200 D3300
D5000 D5200 D5300 D5500
D40 D40x D50 D60 D610
D70 D70s D80 D90
F100 F401 F401S F401X F50 F501 F55 F60 F601 F65 F70 F75 F80 F801 F801S
N2020 N4004 N4004S N401X N50 N55 N60 N601 N65 N70 N75 N80 N801 N801S
Pronea 6i 600i S
HS10 HS20EXR HS30EXR S100FS S200EXR
S100FS S200EXR S205EXR S4000 S8100 S9500 S9600
X-T1 X-S1 X-T2
Konica / Minolta
E-300 E-330 E-400 E-410 E-420 E-450 E-500 E-510 E-520 E-620
OM-D E-M5 E-M5 Mark II
OM-D E-M1 OM-D E-M10
OM-101 OM-707 OM-77 OM-88
DMC-G1 G2 G3 G5 G6 G7 G10 G70 G81
DMC-GH3 GH4 GH5
*istDL *istDL2 *istDs
K-3 K-3II K-m K-r K-x
K100D K10D K110D K2000 K2000 K200D K20D K500
GX-1L 1S 20
NX1 NX5 NX10 NX11 NX20
α7 α7R α7S α7RII
Alpha A100 A200 A230 A290 A300 A330 A350 A380 A390
SLT-A33 A37 A55 A57 A58 A65 A77 A99
These products might interest you as well: