camera is not included with the ewa-marine raincape

Please note: This housing is no longer in production and we do not have any stock left in the factory. Please check with your local distributor, dealer to find out if they can still supply you.

The rain cape VC-M is a universal rain cape which is suitable for a wide range of camcorders from all leading manufacturers. It can accommodate camcorder systems with a maximum length of 21cm (8,3 inches).

The VC-M rain cape is manufactured from a special PVC and has an integrated, optically neutral flat glass port to protect the camcorders lens against rain, salt spray, sand dirt, etc.

The front glass is held in position by means of a special metal bar that connects directly to the camcorders tripod thread.

The cape allows both hand held as well as tripod operation of the camera. The VC-M can be closed by means of press-studs at the bottom



22 cm (8,7 inches)


10 cm (3,9 inches)


20 cm (7,9 inches)

position of view finder

large, central

front glass diameter

95 mm (3,7 inches)


280 g (0,62 lbs)

You will receive the following with your new VC-M raincape:

  • metal bar with 2 screws and base plate


The VC-M raincape has been discontinued. The new follow-up modell is the VC-1M raincape.

All data and pictures show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Sorry! No iFrames possible in your browser!
Entschuldigung! Ihr Browser unterstützt keine iFrames!