The VC-1S is a raincape for the current smaller camcorders.
The camera is attached to the front port, by means of an ewa-marine C-A52 adapter. This patented system attaches the cape to the camcorder and holds the front port in front of the lens like an optional, clear filter.
Due to the new design, it is now possible to open a flap on the cape in order to use the cameras LCD-monitor. This ideal for tripod operation.
The VC-1S raincape is manufactured from special PVC and has an integrated, optically neutral flat glass port.
The VC-1S can be closed by means of press-studs at the bottom.
The VC-1S raincape is designed for small camcorders like for example the Canon HV10 or other similar camcorder modells till a maximum length of 15cm ( 5,9 inches).
150 mm / ( 5 7/8 inches )
55 mm / ( 2 1/8 inches )
185 mm / ( 7 1/4 inches )
position of view finder
front glass diameter
75 mm / ( 3 inches )
about 190 g / ( 0,42 lbs )
You will receive the following with your new VC-1S raincape:
- CAF Ring with 52mm filterthread
- Adapter with 49mm filterthread
All data and pictures show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Entschuldigung! Ihr Browser unterstÃ¼tzt keine iFrames!