VC-1S
- camera and tripod are not included with the ewa-marine raincape
Attention:
Please note that you have to buy the propper step-up ring (connection from the camera- filterthread to the CA52 adapter with 52mm thread) separately.
The VC-1S is a raincape for the current smaller camcorders.
The camera is attached to the front port, by means of an ewa-marine C-A52 adapter. This patented system attaches the cape to the camcorder and holds the front port in front of the lens like an optional, clear filter.
Due to the new design, it is now possible to open a flap on the cape in order to use the cameras LCD-monitor. This ideal for tripod operation.
The VC-1S raincape is manufactured from special PVC and has an integrated, optically neutral flat glass port.
The VC-1S can be closed by means of press-studs at the bottom.
The VC-1S raincape is designed for small camcorders like for example the Canon HV10 or other similar camcorder modells till a maximum length of 15cm ( 5,9 inches).
Dimensions:
length | 150 mm / ( 5 7/8 inches ) |
width | 55 mm / ( 2 1/8 inches ) |
hight | 185 mm / ( 7 1/4 inches ) |
position of view finder | large, central |
front glass diameter | 75 mm / ( 3 inches ) |
weight | about 190 g / ( 0,42 lbs ) |
You will receive the following with your new VC-1S raincape:
- CAF Ring with 52mm filterthread
- Adapter with 49mm filterthread
