ewa-marine 3D-M / ewa-marine D-SW

 

The new 3D-M (old designation D-SW model) is manufactured from double laminated PVC and has an optical glass port. It is rated for dives of up to 10 metres depth.

Perfect for snorkelling, shallow diving, sandy, dusty, humidity or foul weather conditions. This housing will give your camera the best possible protection whilst being fully operable.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of two screw knobs.

The 3DM housing was specially designed for the Sony W1 digital stills camera. It will also fit the W5 and W7.

 


Technical Specification:

Width 152 mm 6"
Height 80 mm 3 1/8"
Depth 31 mm 1 1/4"
  61 mm incl. lens tubus 2 3/8" incl. lens tubus
Diameter front glass 40 mm 1 1/2"

You will receive the following with your new 3DM :

  • manual for ewa-marine compact camera housings
  • special foam padding
  • initial silica gel

 

 

 


Optional Accessories

These accessories are availible from your local ewa-marine dealer:

 

All data and pictures show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Sorry! No iFrames possible in your browser!
Entschuldigung! Ihr Browser unterst√ľtzt keine iFrames!