camera is not included with the ewa-marine raincape

Please note: This housing is no longer in production and we do not have any stock left in the factory. Please check with your local distributor, dealer to find out if they can still supply you.

The raincape VC-XL is specially developed for the Canon XL 1 / XL1 S. The VC-XL raincape is manufactured from special PVC and has an integrated, optically neutral flat glass port.

The camera is attached to the front port, by means of an ewa-marine C-AF adapter.

This patented system attaches the cape to the camcorder and holds the front port in front of the lens like an optional, clear filter.

The camera can still be used on a tripod while it is under the raincape. The VC-XL can be closed by means of press-studs at the bottom.



40 cm (15,8 inches)


12 cm (4,7 inches)


28 cm (11 inches)

position of view finder

left side

front glass diameter

75 mm / (3 inches)


300 g / (0,66 lbs)

You will receive the following with your new VC-XL raincape:

  • CAF Ring with 49 - 62mm filter thread adapters
  • CAF Ring with 72mm filter thread adapters

All data and pictures show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Sorry! No iFrames possible in your browser!
Entschuldigung! Ihr Browser unterstützt keine iFrames!