VC-XL2

: camera is not included with the ewa-marine raincape

The raincape VC-XL2 is specially developed for the Canon XL 2.

The VC-XL2 raincape is manufactured from special PVC and has an integrated, optically neutral flat glass port.

The camera is attached to the front port, by means of an ewa-marine C-AF adapter. This patented system attaches the cape to the camcorder and holds the front port in front of the lens like an optional, clear filter.

The camera can still be used on a tripod while it is under the raincape.

The VC-XL2 can be closed by means of press-studs at the bottom.

Dimensions:

length	40 cm (15,8 inches)
width	12 cm (4,7 inches)
hight	28 cm (11 inches)
position of view finder	left side
front glass diameter	75 mm / (3 inches)
weight	300 g / (0,66 lbs)

You will receive the following with your new VC-XL2 raincape:

CAF Ring with 49 - 62mm filter thread adapters
CAF Ring with 72mm filter thread adapters

All data and pictures show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.